|
|
PHYSICAL AND CHEMICAL PROPERTIES
CLASSIFICATION: NONPOLAR AGROBASED SOLVENTS
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Appearance |
Visual |
Clear |
- |
Colour* |
Visual |
Orange-yellow |
- |
Odour |
Olfactory |
Light Properties |
- |
Density at 25°C |
NF EN ISO 12185 |
916 |
kg/m3 |
Freezing point |
ISO 3016 |
-12 |
°C |
Solubility in water |
- |
0 |
% |
Kinematic viscosity at 40°C |
NF EN 3104 |
31 |
mm²/s |
Surface tension |
NF ISO 6295 |
28.7 |
Dynes/cm |
Refractive index |
NF EN ISO 6320 |
1.4740 |
|
Solvent power Kauri Butanol index |
ASTM D 1133 |
>220 |
- |
Acid value |
EN 14104 |
<1 |
mg(KOH)/g |
Iodine value |
NF EN 14111 |
<120 |
gI2/100g |
Water content |
NF ISO 6296 |
< 0.2 |
% |
FIRE SAFETY PROPERTIES |
|||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Flash point (vacuum) |
NF EN 22719 |
>170 |
°C |
Self-ignition point |
ASTM E 659 |
>250 |
°C |
Lower explosive limit |
- |
Non-explosive |
% (by volume) |
Upper explosive limit |
- |
Non-explosive |
% (by volume) |
Content of explosive, oxidizing, flammable, highly or extremely flammable substances |
CLP Regulation GHS |
Total absence |
% |
TOXICOLOGICAL PROPERTIES |
|||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Anisidine value |
NF ISO 6885 |
<5 |
- |
Peroxide value |
NF ISO 3960 |
<10 |
meq(O2)/kg |
TOTOX (anisidine value + 2x peroxide value) |
- |
<25 |
- |
CMR, irritating and corrosive substance content |
CLP Regulation |
Total absence |
% |
Residual methanol content from transesterification |
GC-MS |
0 |
% |
Emissions of hazardous, CMR, irritant, corrosive compounds at 160°C. |
GC-MS |
0 |
% |
Limit value and average exposure (VLE and VME) |
without |
ppm |
|
ENVIRONMENTAL PROPERTIES |
|
||
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
Water endangering |
WGK Germany |
1 |
class |
Primary biodegradability CEC 21 days at 25°C |
L 33 T 82 |
Over 90 |
% |
Easy biodegradability OECD 301 A over 28 days |
ISO 7827 |
over 80 |
% |
Easy and ultimate biodegradability OECD 310 C over 28 days Biodegradation at 67 days |
Modified MITI |
over 90 100 |
% % |
Bioaccumulation n-octanol water partition coefficient |
OECD 107 |
less than 3 |
log Kow |
Vapour pressure at 20°C |
- |
<0.1 |
hPa |
VOC (Volatile Organic Compounds) content |
- |
0 |
% |
Solvent content |
- |
0 |
% |
Environmentally hazardous substances content |
- |
Total absence |
% |
Content of compounds with a GWP |
- |
0 |
% |
Content of compounds with an ODP |
- |
0 |
% |
Carbon balance, life cycle analysis |
ISO 14040 |
1.60 |
Carbon Equivalent Kg |
DIRECTIONS FOR USE
Use pure. Ready to use. Easily distributed in asphalt plants equipped with automatic spraying systems for the treatment of skips. For plants that are not equipped, the hirers can treat the skips with a low-pressure sprayer.
Make a 2-FUNCTION PRODUCT Gently de-bituminizing – Anti-stick
Mix SOLVETAL® DBA 200 and SOLVETAL® AC 100 at 50%/50%.
PRESENTATIONS
Container GRV 1000 L Drum 200 L Can 20 L
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.